Ford Expedition/Lincoln Navigator (2018-Current) Slimline II Roof Rail Rack Kit - By Front Runner

Ford Expedition/Lincoln Navigator (2018-Current) Slimline II Roof Rail Rack Kit - By Front Runner

Ford Expedition/Lincoln Navigator (2018-Current) Slimline II Roof Rail Rack Kit - By Front Runner

You don’t need a permanent roof rack installation to unlock your next adventure. The Slimline II Roof Rail Rack Kit for the 2018-Current Ford Expedition or Lincoln Navigator installs onto your factory rails, drill-free, with off-road tough feet. You can enjoy the utility of Front Runner rack accessories, while maintaining the ability to remove the rack at any time

Product weight: 35.04  kg

Availability: Delivered directly from the manufacturer - about 1-week

FR - KRFE009T

Online only
This 1762mm/69
4'' long, full-size, Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and 6 Grab-On Feet to mount the Slimline II Tray to the roof rails of your Ford Expedition or Lincoln Navigator (2018-Current)
This system installs easily with feet that grab on to the existing factory/OEM roof rails
No drilling required
All Front Runner Rack Kits contain installation instructions as well as all components needed to mount the Slimline II Tray to your vehicle
Rack kit can be removed temporarily so you can continue to use your OEM rails
All Front Runner Racks are backed by a Limited Lifetime Warranty
Factory Rail Rack Kits are designed as a ''light duty'' cargo solution
Please refer to your vehicle owner’s manual for manufacturer’s recommended load rating
For optimal load-carrying capacity, we recommend that weight is evenly distributed across the rack, and that there is no cargo overhang (excluding sports gear)
Factory Rail Rack Kits are not suited for extreme off-road conditions
Please consider a different Front Runner rack solution for that purpose
Please contact us for advice on mounting solutions for your specific vehicle and usage
NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit
KRFE009T - Ford Expedition/Lincoln Navigator (2018-Current) Slimline II Roof Rail Rack Kit - By Front RunnerConsisting of: 3x GOFR001 - Rail Foot Base (Pair)3x GORR054 - Raised Rail Outer Grips / No
53x GORR070 - Raised Rail Inner Grips / A1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34kg (74.96lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot or Grab-on Foot listed above
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2'') to the height of the Legs to determine the height of the rack from your vehicle's rain gutters
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2'') to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof
Shipping Dimensions:Width: 440mm (17'')Length: 1730mm (68'')Height: 160mm (6'')Shipping Weight:Weight: 35kg (77lbs)

1 592,10 €

Add to cart

Data sheet

  • Brand - Front Runner Outfitters
  • Make - FORD
  • Model - EXPEDITION
  • Categories - Acessories
  • Subcategories - Roof racks

30 other products in the same category:

Copyright © 4x4 Parts 2023 All Rights Reserved